CCTV취약성점검.pptxForgotten or lost login credential information needed to access surveillance systems and/or individual components is a fairly common occurrence for A1 customers. Specifically user names, passwords & IP addresses, which are all touched on in this article. The information found on this page will potentially be applicable for a wide-range of system applications and types (including, but not limited to) smaller residential systems on up to enterprise/commercial systems and even Integrators trying to help their customers!
We will warn you that some equipment manufacturers can have ‘advanced product lines’ that also include unique credential protocols. In those cases this information may not/would not apply, and if so, you can also try referencing the installation manual specific to that product. These manuals are often found online by searching your specific part number and then some light digging into those online search listings, but as well the A1 service team can provide manuals to you if you are unable to locate that.
Below is a chart that lists default credentials by manufacturer/brand name. If you or someone with access to your system has changed any default values, then the default credentials would no longer apply unless the equipment in question is first ‘reset’ (resetting equipment is also something the A1 team is happy to help you if needed). Below is an easily referenced chart for you, hope it helps but reach out to us if it does not or for any other service needs you are unable to resolve yourself!
For How to Reset IP Camera to Factory Settings by Brands please click HERE
If you have any questions, please feel free to ask using the chat window below.
*Caps-lock sensitive.
Acti
Username: Admin/admin
Password: 12345/123456
IP address: 192. 168.0.100
Arecont Vision
Arecont does not have a default password , but you can reset it to factory settings. Follow these steps
1-Access the camera's web interface by typing the IP in your web browser.
2-Under the Administration or System tab, click on Restore to Factory Default.
3-Once the camera reboots, all settings on the camera will be restored to factory default
AXIS
For an old system:
Username: Root
Password: Pass
IP Address: 192.168.0.90
But new generation AXIS cameras have a resetting sequence
1-Remove the Ethernet cable
2-Press and hold the control button and insert the Ethernet cable again while holding the control button.
3-Hold the control button until the amber lights turn on.
4-Then release the button .
5-Wait about 1 minute.
6-When the amber lights turns into the green lights your camera is resetted and your passoword as well
BOSCH
For old models:
Username: service
Password: service
IP Address: 192.168.0.1
For new models:
You can reset the camera by pushing the reset button about 7 seconds. Or you can reset the NVR by removing the battery on the mainboard (not recommended, at your own risk)
DAHUA
Username: admin
Password: admin
GEOVISION
Username: admin
Password: admin
IP Address: 192.168.1.108
HIKVISION
For old models (before firmware 5.3.0)
Username: admin
Password: 12345
IP Address: 192.0.0.64
For new models you can reset password via SADP tool. Please click the link below and follow the instructions on the pdf file
Hikvision password resetting guide
LTS Security
Username: admin
Password: 12345 or123456
IP Address: 192.0.0.64
For platinum models please click the link below for pdf file.
LTS platinum series password reset
Messoa
Username: admin
Password: 1234 or model number of camera or
IP address: 192.168.1.30
Mobotix:
Username: admin
Password: meinsm
SAMSUNG Techwin
For old models
Username: admin
Password: 111111 or 1111111
For new models
Username: admin
Password: 4321
IP Address: 192.168.1.200
SONY
Username: admin
Password: admin
IP Address: 192.168.0.100
Speco
For old models:
Username: root or admin
Password: root or admin
For new models:
Username: admin
Password: 1234
IP Address: 192.168.1.7
Ubiquiti
Username: ubnt
Password: ubnt
IP Address: 192.168.1.20
Videocomm
Username: admin
Password: 12345
Vivotek
None . You can choose your own password after setup. If you want to reset it
1-Press and hold down the reset button for at least 1 minute
2-Power on the camera until the red light flashes rapidly
Now your camera is back to factory default without any password.
For other brands usernames and passwords please see below
| Camera Manufacturer | Username | Password | Default IP |
| 3xLogic | admin | 12345 | 192.0.0.64 |
| ACTi | Admin or admin | 123456 | 192.168.0.100 |
| American Dynmics | admin | admin | 192.168.1.168 |
| Arecont Vision | admin | no set password | no default/DHCP |
| Avigilon | admin | admin | no default/DHCP |
| Axis | root | pass or no set password | 192.168.0.90 |
| Basler | admin | admin | 192.168.100.x |
| Bosch | service | service | 192.168.0.1 |
| Bosch | Dinion | no set password | 192.168.0.1 |
| Brickcom | admin | admin | 192.168.1.1 |
| Canon | root | Model# of camera | 192.168.100.1 |
| CBC Ganz | admin | admin | 192.168.100.x |
| Cisco | no default | no set password | 192.168.0.100 |
| CNB | root | admin | 192.168.123.100 |
| Costar | root | root | unknown |
| Dahua | admin | admin | 192.168.1.108 |
| Digital Watchdog | admin | admin | 192.168.1.123 |
| DRS | admin | 1234 | 192.168.0.200 |
| DVTel | Admin | 1234 | 192.168.0.250 |
| DynaColor | Admin | 1234 | 192.168.0.250 |
| FLIR | admin | fliradmin | 192.168.250.116 |
| Foscam | admin | [leave blank] | unknown |
| GeoVision | admin | admin | 192.168.0.10 |
| Grandstream | admin | admin | 192.168.1.168 |
| GVI | Admin | 1234 | 192.168.0.250 |
| HIKVision | admin | 12345 | 192.0.0.64 |
| Honeywell | administrator | 1234 | no default/DHCP |
| IOImage | admin | admin | 192.168.123.10 |
| IPX-DDK | root | Admin or admin | 192.168.1.168 |
| IQInvision | root | system | no default/DHCP |
| JVC | admin | Model# of camera | no default/DHCP |
| LTS Security | admin | 123456 | 192.0.0.64 |
| March Networks | admin | [leave blank] | unknown |
| Merit Lilin Camera | admin | pass | no default/DHCP |
| Merit Lilin Recorder | admin | 1111 | no default/DHCP |
| Messoa | admin | Model# of camera | 192.168.1.30 |
| Mobotix | admin | meinsm | no default/DHCP |
| Northern | admin | 12345 | 192.168.1.64 |
| Panasonic | admin | 12345 | 192.168.0.253 |
| Panasonic | admin1 | password | 192.168.0.253 |
| Pelco | admin | admin | no default/DHCP |
| PiXORD | admin | admin | 192.168.0.200 |
| PiXORD | root | pass | 192.168.0.200 |
| QVIS | Admin | 1234 | 192.168.0.250 |
| Samsung | root | 4321 or admin | 192.168.1.200 |
| Samsung | admin | 4321 or 1111111 | 192.168.1.200 |
| Sanyo | admin | admin | 192.168.0.2 |
| Sentry360 | Admin | 1234 | 192.168.0.250 |
| Sony | admin | admin | 192.168.0.100 |
| Speco | root | root | 192.168.1.7 |
| Speco | admin | admin | 192.168.1.7 |
| StarDot | admin | admin | no default/DHCP |
| Starvedia | admin | no set password | no default/DHCP |
| Toshiba | root | ikwb | 192.168.0.30 |
| Trendnet | admin | admin | 192.168.10.1 |
| UDP | root | unknown | unknown |
| Ubiquiti | ubnt | ubnt | 192.168.1.20 |
| W-Box | admin | wbox123 | 192.0.0.64 |
| Wodsee | admin | [leave blank] | unknown |
| Verint | admin | admin | no default/DHCP |
| VideoIQ | supervisor | supervisor | no default/DHCP |
| Vivotek | root | no set password | no default/DHCP |
https://ipvm.com/reports/ip-cameras-default-passwords-directory
Below is a directory of 50+ manufacturer's default passwords.
Note: Change Default Passwords
Leaving default passwords is dangerous and makes it easy for even inexperienced attackers to take control, brick or watch your video feed. Worse, since many cameras are made available over the Internet (often because of another risky practice, port forwarding or because the manufacturer defaulted UPnP on), the cameras may be attacked from anywhere in the world.
Manufacturer List Default Passwords
While IPVM strongly recommends using complex passwords, users may still need to know defaults when cameras are first configured or factory defaulted, and finding these credentials can be aggravating, with many manufacturers burying them in PDF manuals or not documenting them at all.
For each manufacturer, we list the username first and pasword section in the following format: username/password. Where manufacturers have multiple defaults, or differences in newer/older firmwares, we have noted it:
- ACTi: admin/123456 or Admin/123456
- Amcrest: admin/admin
- American Dynamics: admin/admin or admin/9999
- Arecont Vision: none
- AvertX: admin/1234
- Avigilon: Previously admin/admin, changed to Administrator/<blank> in later firmware versions
- Axis: Traditionally root/pass, new Axis cameras require password creation during first login (note that root/pass may be used for ONVIF access, but logging into the camera requires root password creation)
- Basler: admin/admin
- Bosch: None required, but new firmwares (6.0+) prompt users to create passwords on first login
- Brickcom: admin/admin
- Canon: root/camera
- Cisco: No default password, requires creation during first login
- Dahua: Requires password creation on first login. Previously this process was recommended but could be canceled; older models default to admin/admin
- Digital Watchdog: admin/admin
- DRS: admin/1234
- DVTel: Admin/1234
- DynaColor: Admin/1234
- FLIR: admin/fliradmin
- FLIR (Dahua OEM): admin/admin
- FLIR (Quasar/Ariel): admin/admin
- Foscam: admin/<blank>
- GeoVision: admin/admin
- Grandstream: admin/admin
- Hanwha: admin/no default password, must be created during initial setup
- Hikvision: Firmware 5.3.0 and up requires unique password creation; previously admin/12345
- Honeywell: admin/1234
- IndigoVision (Ultra): none
- IndigoVision (BX/GX): Admin/1234
- Intellio: admin/admin
- Interlogix admin/1234
- IQinVision: root/system
- IPX-DDK: root/admin or root/Admin
- JVC: admin/jvc
- Longse: admin/12345
- Lorex: admin/admin
- LTS: Requires unique password creation; previously admin/12345
- March Networks: admin/<blank>
- Mobotix: admin/meinsm
- Northern: Firmware 5.3.0 and up requires unique password creation; previously admin/12345
- Oncam: admin/admin
- Panasonic: Firmware 2.40 and up requires username/password creation; previously admin/12345
- Pelco: New firmwares require unique password creation; previously admin/admin
- Pixord: admin/admin
- Q-See: admin/admin or admin/123456
- Reolink: admin/<blank>
- Samsung Electronics: root/root or admin/4321
- Samsung Techwin (old): admin/1111111
- Samsung (new): Previously admin/4321, but new firmwares require unique password creation
- Sanyo: admin/admin
- Scallop: admin/password
- Sentry360 (mini): admin/1234
- Sentry360 (pro): none
- Sony: admin/admin
- Speco: admin/1234
- Stardot: admin/admin
- Starvedia: admin/<blank>
- Sunell: admin/admin
- Swann: admin/12345
- Trendnet: admin/admin
- Toshiba: root/ikwd
- VideoIQ: supervisor/supervisor
- Vivotek: root/<blank>
- Ubiquiti: ubnt/ubnt
- Uniview: admin/123456
- W-Box (Hikvision OEM, old): admin/wbox123
- W-Box (Sunell OEM, new): admin/admin
- Wodsee: admin/<blank>
If we have missed a manufacturer or made errors, please comment (or email info@ipvm.com) and we will add/fix it.
Missing? May Be An OEM
Dahua and Hikvision have 100+ relabelers/OEMs and many of them may simply use the same password requirements as their base manufacturer. If your chosen manufacturer is not listed, check our Hikvision OEM Directory and Dahua OEM Directory to see if they may be relabeled.
Strong Password Measures Increasing